A high quality, outdoor rated, decal.
Represent those guys who did that one thing for you, and look good doing it!
Perfect for vehicles, guns safes, cases, and your anti-gun neighbor...
These are CNC cut outdoor rated vinyl. They are going to come sandwiched between a white paper backing and a clear vinyl tape. Carefully peal off the white backing, being careful to 'stick down' the red vinyl if it tries to peal up from the transfer tape. A great technique is to lay the whole thing face down, and peal the white backing off slowly, but at a sharp angle, like straight back on itself. This will make the backing form a tight hairpin shape as it releases from the red vinyl, which will help the vinyl remain stuck to the tape. Once the backing is off, figure out where you want your sticker. Clean the surface, and stick the whole thing on. If it's oily plastics, it may not want to stick. If it's clean metal, you may never get it off.
Stick it on carefully. I find it's easiest to put a bend into the assembly so that it touches at the middle first, then carefully roll the edges down. Starting from the middle, use your thumb to work all the bubbles out. This vinyl is flexible, so if you got some wrinkles while laying it, you may be able to smooth them out. Once you've stuck it down well, peal off the clear tape just like you did the white backing. And there you go, another Brimstone logo professionally applied.