Shop Gunsmithing - Pistol Services - Slide Milling

Glock Slide Milling for Trijicon RMR/SRO/Holosun

MSRP:

Was:

Now: $185.00

Choose Options
Glock Holosun 407/507K Milling

MSRP:

Was:

Now: $185.00

Choose Options
Glock Slide Milling for Leupold DeltaPoint Pro

MSRP:

Was:

Now: $185.00

Choose Options
Glock Elite Slide Work

MSRP:

Was:

Now: $350.00

Choose Options
Glock Upgraded Serration Package

MSRP:

Was:

Now: $285.00

Choose Options
Glock Basic/EDC Serration Package

MSRP:

Was:

Now: $185.00

Choose Options
Glock RMR Cover Plate (Our cut only!)

MSRP:

Was:

Now: $30.00

Choose Options
CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

MSRP:

Was:

Now: $200.00

Choose Options
P365 Holosun 407/507 K

MSRP:

Was:

Now: $225.00

Choose Options
M&P Deltapoint Pro Optic Milling

MSRP:

Was:

Now: $200.00

Choose Options
Glock Slide Milling, Burris FastFire 3

MSRP:

Was:

Now: $185.00

Choose Options
Glock Slide Milling, Vortex Viper

MSRP:

Was:

Now: $185.00
HK VP9 Deltapoint Pro Milling

MSRP:

Was:

Now: $235.00

Choose Options
Elite FS (Front Serration model)

MSRP:

Was:

Now: $350.00

Choose Options
Evolution One Zero (Mayhem Syndicate) Slide Work

MSRP:

Was:

Now: $350.00

Choose Options
Glock RMRcc

MSRP:

Was:

Now: $185.00

Choose Options
P365 Trijicon RMRcc

MSRP:

Was:

Now: $225.00

Choose Options
CZ P10 C/F Deltapoint Pro Milling

MSRP:

Was:

Now: $200.00

Choose Options
P320 Leupold Deltapoint Pro Milling

MSRP:

Was:

Now: $225.00

Choose Options
Glock RMS Optic cut

MSRP:

Was:

Now: $185.00

Choose Options
Sig P320 RMR Slide Milling

MSRP:

Was:

Now: $200.00

Choose Options
M&P RMR/SRO/Holosun 407c/50c/508t Optic Milling

MSRP:

Was:

Now: $200.00

Choose Options
Glock Vortex Venom Slide Milling

MSRP:

Was:

Now: $185.00

Choose Options

Glock Slide Milling for Trijicon RMR/SRO/Holosun

The Trijicon RMR is one of the most physically durable red dots on the market. Putting it on a Glock is seriously an obvious choice. This red dot is small and low enough to fit between the rear dovetail and the internal safety plunger, and cowitness...

MSRP:

Was:

Now: $185.00

Choose Options
Glock Holosun 407/507K Milling

This will mill your Glock slide for the Holosun 507K red dot, without any adapter plates. The red dot is small enough to fit in front of the rear factory dovetail, and we can mill it deep enough to just see your factory height sights through the red dot....

MSRP:

Was:

Now: $185.00

Choose Options
Glock Slide Milling for Leupold DeltaPoint Pro

The cost includes all tear down and reassembly, including installing new sights if you included them, and it also includes a single color Cerakote of your choice on the slide. If you want a custom color or pattern, please email or call before placing...

MSRP:

Was:

Now: $185.00

Choose Options
Glock Elite Slide Work

Our Elite slide work package is a clean, simple, and effective way to customize the look of your slide. It features front angled serrations, corner serrations, top chevron serrations, a dish cut with or without windows on both sides and is finished...

MSRP:

Was:

Now: $350.00

Choose Options
Glock Upgraded Serration Package

Upgraded Slide Serration Work These slide serrations were originally intended for someone running a red dot, and was ‘loosing’ a lot of the realestate that they normally had for manipulation at the rear of the slide. That said,...

MSRP:

Was:

Now: $285.00

Choose Options
Glock Basic/EDC Serration Package

This serration package is ideal for someone who wants to upgrade the functionally of their firearm, while maintaining the cosmetic and physical function of the firearm. Adding 4-6 Serrations (depending on model) giving you grip for slide manipulations...

MSRP:

Was:

Now: $185.00

Choose Options
Glock RMR Cover Plate (Our cut only!)

Optic plate cover for when you don't want to have your optic mounted on your Glock Pistol. These will only fit with our RMR cut. These will be cerakoted to match your slide with work, or will be shipped cerakoted black if purchased separately.

MSRP:

Was:

Now: $30.00

Choose Options
CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

P 10 C or F milling for the RMR footprint. Iron option include no BUIS or Glock rear dovetail milled in front of optic. Cerakote refinish of the slide is required. Disassembly, assembly, sight install is included as well. If you are doing iron forward...

MSRP:

Was:

Now: $200.00

Choose Options
P365 Holosun 407/507 K

This will allow you to mount your Holosun 507K red dot directly to your Sig P365 slide. This will keep your rear dovetail intact, allowing you to cowitness with iron sights. The top of the base on this red dot is .140" above the top of the slide, so you...

MSRP:

Was:

Now: $225.00

Choose Options
M&P Deltapoint Pro Optic Milling

Ready to add an Optic cut to your Smith and Wesson M&P? (No loaded chamber indicator models or Shields) Well here you go! When milling for your optic you blow out the factory rear sight location, so you can either add a Glock rear sight dovetail in...

MSRP:

Was:

Now: $200.00

Choose Options
Glock Slide Milling, Burris FastFire 3

You need a budget-friendly red dot mounted on your Glock? Say no more. Fast, precise, and durable red dot mounting for the Burris FastFire 3 on standard frame Glocks. We will machine this low enough to easily cowitness with the Trijicon Suppressor...

MSRP:

Was:

Now: $185.00

Choose Options
Glock Slide Milling, Vortex Viper

MSRP:

Was:

Now: $185.00
HK VP9 Deltapoint Pro Milling

This will allow you to mount a Leupold DPP directly to your HK VP9 slide. WE MUST HAVE the entire assembled slide to do this project! Due to HK's design, we will need to shorten the internal safety plunger slightly. When done, the red dot will be holding...

MSRP:

Was:

Now: $235.00

Choose Options
Elite FS (Front Serration model)

This will mill your G45, G19, G17, G34 GEN 5 with front serrations for our Elite FS slide serration package. The factory rear and front serrations will all be cut deeper and sharper, corner serrations will be added from the first front serration back to...

MSRP:

Was:

Now: $350.00

Choose Options
Evolution One Zero (Mayhem Syndicate) Slide Work

Developed with Evolution One Zero (Formerly known as Mayhem Syndicate) for maximum function, grip, and slide longevity. Removing as little material as possible, keeping max material at the rails for longevity of the slide and maximum function in the...

MSRP:

Was:

Now: $350.00

Choose Options
Glock RMRcc

This will allow you to mount the Trijicon RMRcc directly to your slide. Due to the small size of the 43/43x/48 slides it will remove your rear dovetail, and since the RMRcc does not have any integral iron sights, you will need to mill a new dovetail in...

MSRP:

Was:

Now: $185.00

Choose Options
P365 Trijicon RMRcc

This will allow you to mount the Trijicon RMRcc on your Sig P365 without any mounting plates. This program allows you to keep your factory rear dovetail, so you can cowitness with iron sighs. The top of the red dot base is roughly .225" above the top of...

MSRP:

Was:

Now: $225.00

Choose Options
CZ P10 C/F Deltapoint Pro Milling

Mill your P 10 C/F for the Leupold Deltapoint Pro. BUIS sight options include - No rear sight/Leupold rear, Irons Behind optic, and irons in front of optic. Cost includes disassembly and assembly. Cerakote refinish of the slide is required. If you...

MSRP:

Was:

Now: $200.00

Choose Options
P320 Leupold Deltapoint Pro Milling

Send in your P320 slide to be milled for a Leupold Deltapoint Pro. Milling will keep your factory dovetail location, but not all sights will fit behind the optic. Single color cerakote is included, but camos, themes,etc can be done for an upcharge.

MSRP:

Was:

Now: $225.00

Choose Options
Glock RMS Optic cut

Shield RMS optic cut for glocks. Low enough to cowitness with factory iron sights. Single color cerakote is included in the price, but camos, battleworn, themes, etc are available for an uncharge.

MSRP:

Was:

Now: $185.00

Choose Options
Sig P320 RMR Slide Milling

Optic milling for the P320- Trijicon RMR/SRO/ Holosun 407c/507c/508t. In between the factory dovetails. Single color cerakote is included in the price, but camos, battleworn, themes, etc are available for an uncharge. Sig slides are...

MSRP:

Was:

Now: $200.00

Choose Options
M&P RMR/SRO/Holosun 407c/50c/508t Optic Milling

Ready to add an Optic cut to your Smith and Wesson M&P? (No loaded chamber indicator models or Shields) Well here you go! When milling for your optic you blow out the factory rear sight location, so you can either add a Glock rear sight dovetail in...

MSRP:

Was:

Now: $200.00

Choose Options
Glock Vortex Venom Slide Milling

Mill your Glock slide for a Vortex Venom red dot optic. Due to the size of the optic you can either have the rear dovetail blown out and no rear sight or you can add a dovetail rear sight in front of the optic for an extra $50. Single color cerakote...

MSRP:

Was:

Now: $185.00

Choose Options