(PLEASE NOTE! At this point it is our understanding that this modification will not work with the Tactical Solutions rifles. It is our understanding that the X-Ring ships with a BX trigger group, but it requires that all of the factory overtravel be left in the trigger to function reliably. Our standard work dials out the overtravel, and that may cause a failure to reset when installed in an X-Ring rifle. There have been zero reports with this issue when 1) This work is installed in any other rifle or 2) When any of our other trigger work is installed in an X-Ring. That is because of the different disconnector design on the BX trigger groups. If you want to make this work you may be able to adjust the overtravel screw to a point where it functions in your X-Ring, but that is not something we can guaranty.)
Presenting the only billet aluminum trigger and full trigger work available for the BX trigger that we are aware of at this point!
If you're familiar with our trigger work, this is basically our Tier 2 trigger work performed on the BX trigger group. It's a huge improvement over the standard Tier 2 triggers however because the internal geometry on these groups is completely different than on the factory triggers. That's why we have to machine a separate type of trigger, and why you aren't seeing a ton of other options on the market just yet.
When we initially launched this service, we were getting trigger pull weights down to 1lb. However long term testing proved that they were not as reliable as the 1.5lb pull weight. It wasn't a ton that failed, but more than we would like to see, so as a result, the 1.5lb pull weight is the only option for these triggers. It's actually fairly difficult to get them up to 2lbs, so that's also not an option unless you absolutely need to have it for some reason. But we can do that with the standard 10/22 group, so you're basically wasting a BX trigger.
This trigger work will finish out with just a little bit of pre travel, a solid wall, very crisp break, with minimal overtravel and a short reset. After doing dozens of standard 10/22 groups over the course of a day, when I get to do a BX trigger I'm always blown away by how much better the BX feels.
(Again, because of the unique internal geometry that these triggers have, we cannot perform a Tier 1 type of trigger work, and remove the pre travel. This basic BX trigger job will result in surprisingly little pre travel, but it will still be there)
As with our other trigger work, to order you just add the item to your cart, and check out as you would with anything else online. You'll get an emailed confirmation which will have all of the shipping and packaging information. If possible, print out that email and include it with your trigger group when you send it in. You'll get an email when it arrives, and another when we ship it back.
Thanks for looking! If you have any other questions, just let us know via the 'Contact Us' tab, or email Info@BrimstoneGunsmithing.com.
49 Reviews
-
ruger trigger work
The trigger grp came out of a Charger, and not a BX grp...is assembled in gun, but not tried yet due to Shelter in Place ruling...will update.
-
BX trigger job
Wow. I've been shooting Ruger 10/22's for over 50 years. The BX triggers were a welcomed improvement, but still lacked. Now, thanks to Brimstone, it's perfect. My BX triggers now break "cleanly" between 1-2 lbs, with a short, smooth take-up, and a very crisp break. The overtravel seems to be nonexistent. My oldest rifle is an original (unaltered) walnut carbine model, that's fired thousands of rounds. Now I'm busting walnuts with it at 50 yds. A more recent sportier is keeping three shot strings inside a dime at 50yds, under a Vortex scope. Brimstone's description of their work is spot on!
-
BX trigger work
I appreciate how Brimstone was able to reduce the trigger pull on my TCR trigger group. The only thing I would say could be improved would be to eliminate the creep in the trigger. I don't know if that's possible and I'm certainly pleased with the let off being what I like and am accustom to with my other guns. Thank for a good job.
-
BX Trigger Job
Excellent work, under 2 lb pull weight, clean break, no overtravel and clean quick reset...highly recommend
-
TCR22 trigger very much improved
Weight and pull length now comparable to an aftermarket Volquartsen type trigger at approximately 40% of the price. OD Green trigger matches the stock, which is a nice little plus.
-
Greatly improved trigger
I had the trigger work done on my T/C R22 and am happy with it. The trigger is much crisper and clean feeling. On my trigger pull gage the pull is about 2.5 lbs, not as light as I thought it would be, but the feel of the trigger is so much better it feels lighter and I am happy. Well worth the money and the turn around time was quick.
-
Almost perfect!
My only suggestion would be this: while you’ve got the BX all apart, replace the plunger spring with a stiffer one. They’re $2, and eliminate magazine wobble, which all but eliminates FTF and FTE troubles.
-
BX Trigger Work
Turned a mediocre TCR22 trigger into crisp under 2# great trigger. I then sent my BX trigger and it turned out great also. Highly recommend.
-
Bx trigger work
Awesome
-
T/C R22 Trigger job (BX package)
I have another Brimstone trigger that I've been enjoying for these past few years, a 2.2 lb sweet spot job, and it's up there with the best I've ever tried. My T/C R22 came in at 1lb 12 oz,. and is completely awesome. It is crisp and smooth with a clean break,.. It is now my favorite. Thanks Brimstone for a great job.
-
TCR22 trigger job
Excellent trigger pull!!!Worth every penny.
-
Brimstoned BX
I bought a tier 2 trigger, , replaced the Bx. It wa so great that I sent the BX in .its even better.. They change the 1022 from an excellent plinker to a Target gun.