phone: (360)210-5403

Shop Gunsmithing

24 of 52 Items
  • 10/22 Cerakote 10/22 Cerakote 10/22 Cerakote

    10/22 Cerakote

    Cerakote is a baked on ceramic finish which is hands down the most durable finish available for firearms. It's significantly more durable than bluing, or the factory paint that Ruger applies to the 'blued' receivers. Another plus is that it's completely...

    $50.00
  • 10/22 Cleaning Rod Hole Drilling

    10/22 Cleaning Rod Hole Drilling

    The 10/22 is an ingenious firearm no question about it. But since the receiver is a cast aluminum box, you can't clean it from the rear of the receiver like you can on a bolt action. This means that you have to clean it from muzzle, which can be...

    $15.00
  • Basic Grip Work Basic Grip Work Basic Grip Work Basic Grip Work Basic Grip Work

    Basic Grip Work

    Basic/Economy package pistol work. This is for those who just want some texture to help with grip, remove or keep the finger grooves and get a single undercut to get rid of the infamous "Glock knuckle" and get a higher grip.  It features Steelwool...

    $200.00
  • Brimstone 10/22 Pull Magazine Release Every pull magazine release includes one of our auto bolt releases, and in fact requires our bolt release to work. Brimstone 10/22 Pull Magazine Release Brimstone 10/22 Pull Magazine Release Brimstone 10/22 Pull Magazine Release

    Brimstone 10/22 Pull Magazine Release

    After being out of production for a number of years, the old Rimfire Tech pull magazine release is being manufactured again by yours truly!  (Complete directions with pictures on how to install this can be found here.  We encourage...

    $42.50
  • Brimstone Custom 10/22 Trigger Brimstone Custom 10/22 Trigger Brimstone Custom 10/22 Trigger

    Brimstone Custom 10/22 Trigger

    (We are working on a video for installing these triggers, but until then all we have is this write up. If you're just buying the trigger, the Brimstone Trigger Fitting Guide is all you'll need. If you're buying the full trigger Kit, you'll ALSO...

    $35.00
  • Brimstone Custom BX Trigger Brimstone Custom BX Trigger

    Brimstone Custom BX Trigger

    This is our machined aluminum trigger ONLY. Just the trigger. Not a trigger group. Not a trigger job. Just the trigger, and maybe some springs and stuff if you choose to do that. Let me repeat. This is just the machined aluminum trigger, like...

    $35.00
  • Brimstone Decals

    Brimstone Decals

    A high quality, outdoor rated, decal. Available in RED only  Represent those guys who did that one thing for you, and look good doing it! Perfect for vehicles, guns safes, cases, and your anti-gun neighbor...   

    $2.00
  • Brimstone Patches

    Brimstone Patches

    No range bag or collection of swag is complete without a little dragon or two...  Top quality vinyl patch made for us by Mil-Spec Monkey. Velcro on the back, awesome on the front. 

    $5.00
  • Cerakote Order Form Multicam Black Arid and Woodland K- Tec Multicam black, Blackout, MCB, Woodland (Top to Bottom)

    Cerakote Order Form

    FAILURE TO INCLUDE THIS FORM WILL RESULT IN DELAYS IMPORTANT: IF YOU ARE SENDING YOUR FIREARM(S) IN WITHOUT USING A FFL PLEASE INCLUDE A PHOTO COPY OF YOUR DRIVERS LICENCE OR ID CARD YOU ARE RESPONSIBLE FOR FOLLOWING ALL STATE AND FEDERAL LAWS TO SHIP...

    $25.00
  • CZ P10 C/F Deltapoint Pro Milling CZ P10 C/F Deltapoint Pro Milling

    CZ P10 C/F Deltapoint Pro Milling

    Mill your P 10 C/F for the Leupold Deltapoint Pro. BUIS sight options include - No rear sight/Leupold rear, Irons Behind optic, and irons in front of optic.  Cost includes disassembly and assembly. Cerakote refinish of the slide is required. If you...

    $200.00
  • CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

    CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

    P 10 C or F milling for the RMR footprint. Iron option include no BUIS or Glock rear dovetail milled in front of optic. Cerakote refinish of the slide is required. Disassembly, assembly, sight install is included as well. If you are doing iron forward...

    $200.00
  • Elite Grip Work Elite Grip Work Elite Grip Work Elite Grip Work Elite Grip Work

    Elite Grip Work

    Elite Grip Work: Whether you are setting up a range pistol or a carry pistol you can customize it any way you want with this package. Comes standard with chainmail texturing (in your choice of aggression) (subcomps will get mini chainmail, it flows...

    $300.00
  • Glock Gen 5 G17 (WITH HALF MOON CUT) Magwell

    Glock Gen 5 G17 (WITH HALF MOON CUT) Magwell

    Gen 5 G17/34 Magwell These Magwells work with the Half Moon Cut version of the 5/17 -If you have a NO HALF MOON CUT 5/17 go with our 5/45 Magwell. - 7075 Billet Aluminum - Includes ultra low-profile billet attachment screw - Made to fit each gen and...

    $89.99
  • Gunsmither 10/22 Barrel Block Gunsmither 10/22 Barrel Block Gunsmither 10/22 Barrel Block Gunsmither 10/22 Barrel Block Gunsmither 10/22 Barrel Block

    Gunsmither 10/22 Barrel Block

      On a lot of 10/22's the barrel does not fit very tightly in the receiver. Not exactly surprising since they just slide into a hole, and to say they are mass-produced is an understatement. The issue is that the factory V-block which holds the...

    $17.50
  • Kagwerks Extended Slide Release Gen 3 & 4 Kagwerks Extended Slide Release Gen 3 & 4 Kagwerks Extended Slide Release Gen 3 & 4 Kagwerks Extended Slide Release Gen 3 & 4 Kagwerks Extended Slide Release Gen 3 & 4

    Kagwerks Extended Slide Release Gen 3 & 4

    Reduce Slide Stop Override! As shooting proficiency grows, so does the way a shooter grips the gun. Using the standard slide release presents certain limitations that can hinder performance and ability for more advanced shooters. Our extended and...

    $45.00
  • Kagwerks Extended Slide Release Gen 5 Kagwerks Extended Slide Release Gen 5 Kagwerks Extended Slide Release Gen 5

    Kagwerks Extended Slide Release Gen 5

    Gen 5: G17, G19, G19X, G26, G34 at this point in time  Tested on and built for Get 5! Be sure to select the proper one. Exchanges are subject to a 20% restocking fee. 

    $50.00
  • M&P Deltapoint Pro Optic Milling

    M&P Deltapoint Pro Optic Milling

    Ready to add an Optic cut to your Smith and Wesson M&P? (No loaded chamber indicator models or Shields) Well here you go! When milling for your optic you blow out the factory rear sight location, so you can either add a Glock rear sight dovetail in...

    $200.00
  • Mini Trigger Work

    Mini Trigger Work

    THIS IS FOR SERVICES ON YOUR TRIGGER ONLY!!!! NO TRIGGER GROUPS ARE FOR SALE!!!   Note: We do not give you an option for trigger weight. They all fall between 3 and 3.5lbs. This may be heavier or lighter than you are used to, but after all our...

    $82.50
  • Operator Frame Work Package Operator Frame Work Package Operator Frame Work Package

    Operator Frame Work Package

    This is a frame setup made for hard use and is not advised for a CCW. This is an aggressive range/gun fighter texture that separates the men from the boys. This is preset package of features listed below and is not customizable minus cerakote. It...

    $375.00
  • P320 Leupold Deltapoint Pro Milling

    P320 Leupold Deltapoint Pro Milling

    Send in your P320 slide to be milled for a Leupold Deltapoint Pro. Milling will keep your factory dovetail location, but not all sights will fit behind the optic. Single color cerakote is included, but camos, themes,etc can be done for an upcharge. 

    $225.00
  • Parts Trays/ EDC Dump Tray Parts Trays/ EDC Dump Tray Parts Trays/ EDC Dump Tray Parts Trays/ EDC Dump Tray Parts Trays/ EDC Dump Tray

    Parts Trays/ EDC Dump Tray

    Kydex EDC dump tray or a convenient tray to hold parts as you work on your gun, car, whatever you want. These come in Black with our logo.  The perfect parts holder when disassembling your 10/22 trigger group for cleaning or maintenance. 

    $20.00
  • Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package

    Platinum Grip Work Package

    Platnium package. This is our exclusive boarder package. It takes our Elite package and adds our signature x marks the spot boarders, glove cuts, your choice of any of our textures, and single color cerakote included. You also get a discount for...

    $425.00
  • Ruger 10/22 Auto Bolt Release Ruger 10/22 Auto Bolt Release Ruger 10/22 Auto Bolt Release Ruger 10/22 Auto Bolt Release

    Ruger 10/22 Auto Bolt Release

    (I feel like it should be pretty clear, but just to be safe, this product will NOT lock the bolt open on an empty magazine. There is one product out there which does that, but it's fairly expensive and requires modified magazines. Not that any of that is...

    $19.95
24 of 52 Items