24 of 27 Items
  • HK VP9 Deltapoint Pro Milling HK VP9 Deltapoint Pro Milling HK VP9 Deltapoint Pro Milling HK VP9 Deltapoint Pro Milling

    HK VP9 Deltapoint Pro Milling

    This will allow you to mount a Leupold DPP directly to your HK VP9 slide. WE MUST HAVE the entire assembled slide to do this project! Due to HK's design, we will need to shorten the internal safety plunger slightly. When done, the red dot will be holding...

    $235.00
  • Elite FS (Front Serration model) Elite FS (Front Serration model) Elite FS (Front Serration model) Elite FS (Front Serration model)

    Elite FS (Front Serration model)

    This will mill your G45, G19, G17, G34 GEN 5 with front serrations for our Elite FS slide serration package. The factory rear and front serrations will all be cut deeper and sharper, corner serrations will be added from the first front serration back to...

    $350.00
  • Evolution One Zero  (Mayhem Syndicate) Slide Work Evolution One Zero  (Mayhem Syndicate) Slide Work Evolution One Zero  (Mayhem Syndicate) Slide Work Evolution One Zero  (Mayhem Syndicate) Slide Work Evolution One Zero  (Mayhem Syndicate) Slide Work

    Evolution One Zero (Mayhem Syndicate) Slide Work

    Developed with Evolution One Zero (Formerly known as Mayhem Syndicate) for maximum function, grip, and slide longevity. Removing as little material as possible, keeping max material at the rails for longevity of the slide and maximum function in the...

    $350.00
  • Glock RMR  Cover Plate (Our cut only!)

    Glock RMR Cover Plate (Our cut only!)

    Optic plate cover for when you don't want to have your optic mounted on your Glock Pistol. These will only fit with our RMR cut. These will be cerakoted to match your slide with work, or will be shipped cerakoted black if purchased separately. 

    $30.00
  • Glock RMRcc Glock RMRcc

    Glock RMRcc

    This will allow you to mount the Trijicon RMRcc directly to your slide. Due to the small size of the 43/43x/48 slides it will remove your rear dovetail, and since the RMRcc does not have any integral iron sights, you will need to mill a new dovetail in...

    $185.00
  • P365 Trijicon RMRcc

    P365 Trijicon RMRcc

    This will allow you to mount the Trijicon RMRcc on your Sig P365 without any mounting plates. This program allows you to keep your factory rear dovetail, so you can cowitness with iron sighs. The top of the red dot base is roughly .225" above the top of...

    $225.00
  • CZ P10 C/F Deltapoint Pro Milling CZ P10 C/F Deltapoint Pro Milling

    CZ P10 C/F Deltapoint Pro Milling

    Mill your P 10 C/F for the Leupold Deltapoint Pro. BUIS sight options include - No rear sight/Leupold rear, Irons Behind optic, and irons in front of optic.  Cost includes disassembly and assembly. Cerakote refinish of the slide is required. If you...

    $200.00
  • CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

    CZ P10 C/F RMR/SRO/Holosun 407/507/508T Milling

    P 10 C or F milling for the RMR footprint. Iron option include no BUIS or Glock rear dovetail milled in front of optic. Cerakote refinish of the slide is required. Disassembly, assembly, sight install is included as well. If you are doing iron forward...

    $200.00
  • P365 Holosun 407/507 K

    P365 Holosun 407/507 K

    This will allow you to mount your Holosun 507K red dot directly to your Sig P365 slide. This will keep your rear dovetail intact, allowing you to cowitness with iron sights. The top of the base on this red dot is .140" above the top of the slide, so you...

    $225.00
  • Operator Frame Work Package Operator Frame Work Package Operator Frame Work Package

    Operator Frame Work Package

    This is a frame setup made for hard use and is not advised for a CCW. This is an aggressive range/gun fighter texture that separates the men from the boys. This is preset package of features listed below and is not customizable minus cerakote. It...

    $375.00
  • Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package Platinum Grip Work Package

    Platinum Grip Work Package

    Platnium package. This is our exclusive boarder package. It takes our Elite package and adds our signature x marks the spot boarders, glove cuts, your choice of any of our textures, and single color cerakote included. You also get a discount for...

    $425.00
  • Elite Grip Work Elite Grip Work Elite Grip Work Elite Grip Work Elite Grip Work

    Elite Grip Work

    Elite Grip Work: Whether you are setting up a range pistol or a carry pistol you can customize it any way you want with this package. Comes standard with chainmail texturing (in your choice of aggression) (subcomps will get mini chainmail, it flows...

    $300.00
  • Basic Grip Work Basic Grip Work Basic Grip Work Basic Grip Work Basic Grip Work

    Basic Grip Work

    Basic/Economy package pistol work. This is for those who just want some texture to help with grip, remove or keep the finger grooves and get a single undercut to get rid of the infamous "Glock knuckle" and get a higher grip.  It features Steelwool...

    $200.00
  • M&P Deltapoint Pro Optic Milling

    M&P Deltapoint Pro Optic Milling

    Ready to add an Optic cut to your Smith and Wesson M&P? (No loaded chamber indicator models or Shields) Well here you go! When milling for your optic you blow out the factory rear sight location, so you can either add a Glock rear sight dovetail in...

    $200.00
  • P320 Leupold Deltapoint Pro Milling

    P320 Leupold Deltapoint Pro Milling

    Send in your P320 slide to be milled for a Leupold Deltapoint Pro. Milling will keep your factory dovetail location, but not all sights will fit behind the optic. Single color cerakote is included, but camos, themes,etc can be done for an upcharge. 

    $225.00
  • Glock Slide Milling for Trijicon RMR/SRO/Holosun Glock Slide Milling for Trijicon RMR/SRO/Holosun Glock Slide Milling for Trijicon RMR/SRO/Holosun

    Glock Slide Milling for Trijicon RMR/SRO/Holosun

    The Trijicon RMR is one of the most physically durable red dots on the market. Putting it on a Glock is seriously an obvious choice. This red dot is small and low enough to fit between the rear dovetail and the internal safety plunger, and cowitness...

    $185.00
  • Leupold Irons Irons in front No irons

    Glock Slide Milling for Leupold DeltaPoint Pro

    The cost includes all tear down and reassembly, including installing new sights if you included them, and it also includes a single color Cerakote of your choice on the slide. If you want a custom color or pattern, please email or call before placing...

    $185.00
  • Elite 34 with Platnium grip work, DPP cut, Mayhem carry comp Boogaloo Camo Elite 43x and 48 examples Elite with no windows Elite with no windows

    Glock Elite Slide Work

    Our Elite slide work package is a clean, simple, and effective way to customize the look of your slide. It features  front angled serrations, corner serrations, top chevron serrations, a dish cut with or without windows on both sides and is finished...

    $350.00
  • Upgraded slide serrations with RMR cut- Blackout cerakote 

Operator Grip work

    Glock Upgraded Serration Package

    Upgraded Slide Serration Work   These slide serrations were originally intended for someone running a red dot, and was ‘loosing’ a lot of the realestate that they normally had for manipulation at the rear of the slide. That said,...

    $285.00
  • Holosun K series with no rear irons Elite slide work with Holosun K optic cut in the raw Elite Slide work with Holosun k optic cut, MC Tropic, Elite grip work Upgraded slide work with Holosun k optic cut and elite grip work

    Glock Holosun 407/507K Milling

    This will mill your Glock slide for the Holosun 507K red dot, without any adapter plates. The red dot is small enough to fit in front of the rear factory dovetail, and we can mill it deep enough to just see your factory height sights through the red dot....

    $185.00
  • Glock RMS Optic cut Glock RMS Optic cut Glock RMS Optic cut

    Glock RMS Optic cut

    Shield RMS optic cut for glocks. Low enough to cowitness with factory iron sights. Single color cerakote is included in the price, but camos, battleworn, themes, etc are available for an uncharge.  

    $185.00
  • Basic/EDC serrations with an RMR optic cut- Sniper gray cerakote 

Elite Grip work Basic/EDC serrations with an RMR optic cut- Sniper gray cerakote 

Elite Grip work

    Glock Basic/EDC Serration Package

    This serration package is ideal for someone who wants to upgrade the functionally of their firearm, while maintaining the cosmetic and physical function of the firearm. Adding 4-6 Serrations (depending on model) giving you grip for slide manipulations...

    $185.00
  • M&P RMR/SRO/Holosun 407c/50c/508t Optic Milling M&P RMR/SRO/Holosun 407c/50c/508t Optic Milling

    M&P RMR/SRO/Holosun 407c/50c/508t Optic Milling

    Ready to add an Optic cut to your Smith and Wesson M&P? (No loaded chamber indicator models or Shields) Well here you go! When milling for your optic you blow out the factory rear sight location, so you can either add a Glock rear sight dovetail in...

    $200.00
  • Norssco Slide milled for a RMR with a Multicam Cerakote job Sig P320 RMR Slide Milling

    Sig P320 RMR Slide Milling

    Optic milling for the P320- Trijicon RMR/SRO/ Holosun 407c/507c/508t. In between the factory dovetails. Single color cerakote is included in the price, but camos, battleworn, themes, etc are available for an uncharge.   Sig slides are...

    $200.00
24 of 27 Items