Slide Milling

Glock, Trijicon RMR/SRO, Holosun 407C/507C/508T, Optic Milling

This will allow you to mount your Trijicon RMR red dot directly to your standard frame Glock (G17, G19, G34, etc.) No additional adapter plates will be needed. This milling leaves your rear dovetail intact, and we mill this as deep as it is possible to...
Glock, Holosun 407k/507k, Optic Milling

This will mill your Glock slide for the Holosun 507K red dot, without any adapter plates. The red dot is small enough to fit in front of the rear factory dovetail, and we can mill it deep enough to just see your factory height sights through the red dot....
Glock, Leupold DeltaPoint Pro, Optic Milling

This work will allow you to mount your Leupold Delta Point Pro red dot directly to your standard frame Glock (G17, G19, G34, etc.) without any adapter plates. Because of the length of the DPP, it will remove your rear dovetail on most slides, except for...
Glock 509T Milling

NOTE: This milling is NOT compatible with the 509t ASCC by Primary Arms. That red dot is longer than the standard 509T, and will not fit in this cut. This will mill your standard frame size (9mm, .40, 357, ect) Glock for the outstanding Holosun 509T...
Glock, Elite Slide Work

Our Elite slide work package is a clean, simple, and effective way to customize the look of your slide. It features front angled serrations, corner serrations, top chevron serrations, a dish cut with or without windows on both sides and is finished...
Glock Basic Slide Serration Work

PLEASE NOTE: This is NOT available for any Glock slide with factory front serrations, or for the Glock 44 This serration package is ideal for someone who wants to upgrade the functionally of their firearm, while maintaining the cosmetic and physical...
Holosun 507C-X2, Red Reticule

The HS507C X2 is an open reflex optical sight designed for pistol applications. The X2 Series pistol optics feature two improvements. First is the addition of Lock Mode from our 2018-2019 LE pistol optic models. Lock Mode, when activated, locks the...

MSRP:

Was:

Now: $309.99

Out of stock
Glock, Upgraded Slide Serrations

Upgraded Slide Serration Work These slide serrations were originally intended for someone running a red dot, and was ‘loosing’ a lot of the realestate that they normally had for manipulation at the rear of the slide. That said,...
Sig P365, Holosun 407k/507k

This will allow you to mount your Holosun 507K red dot directly to your Sig P365 slide. This will keep your rear dovetail intact, allowing you to cowitness with iron sights. The top of the base on this red dot is .140" above the top of the slide, so you...
Lower 1/3 Cowitness sights for 509T

Lower 1/3 cowitness blacked out sights for your 509T with our milling. If you purchase with milling we will install and align them free of charge.
Operator Slide Work

Developed with Evolution One Zero (Formerly known as Mayhem Syndicate) for maximum function, grip, and slide longevity. Removing as little material as possible, keeping max material at the rails for longevity of the slide and maximum function in the...
Sig P365, Trijicon RMRcc

This will allow you to mount the Trijicon RMRcc on your Sig P365 without any mounting plates. This program allows you to keep your factory rear dovetail, so you can cowitness with iron sighs. The top of the red dot base is roughly .225" above the top of...
CZ P10, Trijicon RMR/SRO and Holosun 407c/507c/508T Milling

P 10 C or F milling for the RMR footprint. Iron option include no BUIS or Glock rear dovetail milled in front or behind of the optic. Cerakote refinish of the slide is required. Disassembly, assembly, sight install is included as well. If you are doing...
Sig P320, Trijicon RMR, Optic Milling

This will allow you to mount your Trijicon RMR red dot directly to your Sig P320 slide. It will leave your rear dovetail untouched, so you can cowitness with iron sights if you want. The distance from the top of the red dot base to the top of the slide...
Elite FS (Front Serration model)

This will mill your G45, G19, G17, G34 GEN 5 with front serrations for our Elite FS slide serration package. The factory rear and front serrations will all be cut deeper and sharper, corner serrations will be added from the first front serration back to...
S&W M&P, Delta Point Pro Optic Milling

This slide work will allow you to directly mount your Leupold DPP on your standard frame Smith & Wesson M&P. This program will remove the rear dovetail. The distance from the top of the slide to the top of the red dot base is .353", so any iron...
S&W M&P, Trij RMR/SRO, Holosun 407c/507c/508t, Optic Milling

This will allow you to mount your Trijicon RMR or Holosun 507c/407c directly to your full size S&W M&P slide. As described above, the rear dovetail must be milled away. You can machine a new dovetail ahead of, or behind the red dot, if you wish...
Glock, Vortex Venom, Optic Milling

This will allow you to mount your Vortex Venom red dot on your standard frame Glock slide. This program will remove the rear dovetail and since the Venom does not have integral sights, you will need to mill a new dovetail to run a rear sight and...
Glock, Burris FastFire 3, Optic Milling

This will mount the Burris FastFire 3 on a standard frame Glock slide. (G17, 19, etc.) It will remove the rear dovetail as the FastFire is too long to fit between dovetails. Height from top of slide to top of red dot base is .225" so any sights taller...
Glock, Vortex Viper, Optic Milling

This will allow you to mount your Vortex Viper red dot directly to your standard frame Glock without any adapter plates. The Vortex Viper is slightly to long to keep the rear dovetail, without cutting into the safety plunger hole, which we do not...
Glock, Aimpoint Acro P1/P2

This will mill your standard frame size Glock (G17, G19, etc.) for the Aimpoint Acro red dot. The Acro is a closed emitter red dot which will clamp onto this milling, so there are no screws to fit. Your Glock should come back ready to drop your red...
RMSC to 407/507k footprint Modification

Factory milled RMSC footprint converted to 407/507k footprint by lowering front studs and removing rear studs. This allows you to directly mount your 407/507k rather than using an adapter plate. Slide refinishing required. Models:...
Glock, Sig Romeo 1

You will not be able to run the sheet metal shield that comes with your Romeo 1, with this milling.This will allow you to mount the Sig Romeo 1 red dot directly to your standard frame Glock (G17, 19, etc.) This program will leave the rear dovetail, and...
Glock, Sig Romeo 1 Pro

This will mill your standard frame size Glock (eg., G17, G19, G26) for the Sig Romeo 1 Pro. This service will NOT work with the standard Sig Romeo 1 red dot. This should allow you to use the included sheet metal guard, and there are recoil studs. Because...