Tier 2 (Intermediate) 10/22 Trigger Work

Not currently for sale, drop in kits coming soon!
168 reviews Write a Review
SKU:
BLA-ED59C4FE
Effective 02/12/2022, Brimstone Gunsmithing will no longer be offering Ruger 10/22, Mini, or BX trigger work. This page will be left active for informational purposes. If you have an existing trigger order, rest assured that it will be processed as normal!  

It is with some regret that we will no longer be offering 10/22 trigger work. This trigger work is what started Brimstone, and what Brimstone Gunsmithing has largely been built on over the last 12 years. However, as times changed and the company has grown, it has become increasingly clear that modifying factory parts is not a repeatable or scalable operation. We are trying to guaranty the quality of the finished product, when the part we have received was an incredibly inexpensive, mass produced, and often used and abused, trigger assembly. This model does not set anyone up for success. As a result, we are focusing on new manufacture of our own parts; expect to see our own drop-in trigger kits soon. 

It's been a great run, and we have met some of the greatest people, while working on these 10/22 triggers. We deeply appreciate all our customers who have stuck with us and supported us over the last decade. And we look forward to working with you again over the next decade on new projects! 
 
This sale is for services on your trigger group. Component pieces of your group can be upgraded, but you supply the initial group.

 

 

The Trigger Job
This trigger work has everything the basic trigger job has, so it's not a bad idea to at least skim the page to get some idea of what we are doing here. This job literally picks up where the basic trigger job stops. All of the same polishing/fitting/tuning happens exactly the same, but this job adds a couple of parts. Primarily, you are getting one of our CNC machined triggers. You can get that trigger in Standard width, which is still slightly wider than the factory, or Full Width. The Full Width triggers does NOT fit more tightly in the trigger group! They both require the exact same fitting; the only difference is cosmetics and the way it feels on your trigger finger. As such, the choice is strictly personal preference. Be very cautious before deciding on the Full Width trigger, because it does require permanent modification of your trigger group, and it feels VERY wide!
 
 
However the real difference is that these triggers allow the instillation of an internal, torsion-type, trigger return spring mounted on the trigger itself. This torsion spring system has no moving or sliding parts (unlike the factory plunger) which allows us to get the take up and the reset silky smooth. The hole for the original trigger return spring is then drilled out, tapped, and an overtravel stop is installed in that hole. This is a much cleaner and more solid method than the screw through the trigger design.  The overtravel stop makes the trigger feel vastly more crisp, and theoretically improves accuracy. 

 
If you are more serious about your shooting or interested in competing, but still working within a budget, this is the job for you. It will result in an excellent trigger pull for a fraction of the cost of a full after market group. Of course, there are bragging rights and a custom look which come with a billet CNC'ed trigger housing, which is certainly something to consider. That said, it's hard to replace a little time and skill in hand fitting with any number of shiny after market parts, and we can often produce a better trigger pull than most of the aftermarket groups. It's not surprising really, you're not paying us to produce parts, just polish and fit them. Most of the big companies have a ton of money invested in the tooling to produce these custom pieces, so to keep costs down they have to produce them in large numbers. By just re-working the factory parts, we can invest the time needed to really fit and polish the parts as they should be, and still keep the overall cost down.

 
Pull Weight
 
Gunsmithing like this is three parts art, one part science, and one part black magic. After all, we are modifying factory parts from a company who isn't known for their precision machined parts. As such it is difficult or impossible to hit an exact finished pull weight. And then when you figure the differences in HOW a pull weight is measured, different scales, even variations in component alignment before and after shipping, asking for a specific weight is just asking for disappointment. 

So. We have two options. The first is what we call the sweet spot, and that's where your trigger naturally wants to go, and where it's going to feel best. It's going to land between 2 and 2.5lbs, and it will feel great. This pull weight range is safe for this trigger group, it's light enough for target shooting, but not so light as to be unsafe for a beginning shooter, or a hunter. If you have a specific weight in mind (for example, you want it as light as it will go) feel free to make a note of that on your order when you send it in, and we will see what your trigger can do to accommodate that. 
 
The second option is 3+ lbs. This option is for folks who shoot in certain competitions that require at least a 3lb trigger. A 3lb weight will be hooked to the trigger, and the trigger will need to be able to pick up that weight. We do NOT recommend this pull weight for most people!! I understand that it doesn't sound like much of a difference, but when you have this trigger next to a 2.5lb trigger, it will feel significantly heavier and less precise. Unless you are confident that you are going to be shooting in these competitions, I would strongly encourage you to purchase the Sweet Spot option. 

Trigger colors
Click on the image at the top of the page with all of the triggers, to see the available color choices. We are a Cerakote Certified applicator, and every trigger is coated here in house. These are the colors we commonly stock, but in the future there will be options for truly custom colors. We have edited the above image to appear as true as possible in color to the finished product, but understand that there could be slight variations on color from one batch to the next, or when displayed on different monitors. If you are getting other parts Cerakoted, it is always best to do everything at the same time, so that the colors all match exactly. 

 
THE AUTO BOLT RELEASE MODIFICATION
There is a little metal tab on the bottom of the trigger housing, towards the front of the trigger guard. If you hold the bolt to the rear, push up on this tab, and let the bolt forward, it will lock the bolt open. This is used as a safety on ranges that require the action to be open when the range is 'cold', or for when you are cleaning the barrel. To close the bolt however, you need three hands. One to hold the rifle, one to pull back on the bolt, and the third to press up on that tab and somehow rotate it to the rear. It's a pain, and not exactly safe if you have a loaded magazine inserted. Our modification makes it so you still lock the action open exactly the same as before, but to close the bolt you just pull back slightly on the charging handle and let it go, just like you do with any other semi-auto firearm. The hold back will will drop out of the way on it's own when you pull back on the charging handle, without you touching the bolt release. This is NOT a last round hold open! No 10/22 built has a last round hold open from the factory. There is one company making them, Google it if you have more questions. We don't carry or install the part.

 
 
 
Shipping Information
Complete shipping instructions and information can be found here.

Return shipping and handling will be added to your order when you check out, regardless of how many trigger jobs you purchase. Once you have purchased this service you will get a confirmation email with all the shipping and packing instructions. Print that off, and include it with your trigger.

 
We are currently processing triggers on Tuesday and Friday, and doing trigger work seven days a week. This means that you may not get an email immediately when it arrives here, for example, if your trigger arrives on a Saturday. In this case, your trigger will not be opened, the order processed, and you emailed until the following Tuesday. If this is a rush project or it's been a while, feel free to contact us! We try to keep you updated of delays as possible, but we have hundreds of projects running at any point. When finished, you will get another email saying that your trigger is finished and shipped, with a tracking number. 

 
 
 
 
Thanks for your interest! Feel free to contact us at any point, and happy shooting.

 
DISCLAIMER:
"RUGER" IS A FEDERALLY REGISTERED TRADEMARK OF STURM, RUGER & COMPANY, INC. AND IS ONE OF MANY FEDERALLY REGISTERED TRADEMARKS OWNED BY STURM, RUGER & COMPANY, INC. BRIMSTONE GUNSMITHING NOR THIS SITE ARE AFFILIATED IN ANY MANNER WITH, OR OTHERWISE ENDORSED BY, RUGER, OR STURM, RUGER & COMPANY, INC.

168 Reviews

  • 5
    Very pleased with tier 2 trigger work

    Posted by Walter Davison on Mar 18th 2022

    Everything was explained phone calls were always answered and I feel comfortable doing business with you in the future

  • 5
    Very happy with this set up ! Very light trigger pull, minimal take-up & overtravel.

    Posted by Mike Paisley on Mar 15th 2022

    When I first installed this trigger group, I was VERY impressed. First trip to the range, all went well for first 3 or 4 shots but then…..the trigger failed to reset. Vigorous working of the action would get it to work but then it fail again. A check of a few rimfire forums revealed others had similar experiences. The common fix was to back-off of the overtravel set screw 1/4 turn. I tried that and it appears to have solved the problem.

  • 5
    Tier 2 Trigger Work

    Posted by John Rabenius on Mar 4th 2022

    Smooth 2 pound trigger, 1/8 inch travel with no over travel - MUCH better than a RUGER BX trigger and cheaper!

  • 5
    Super fast turnaround

    Posted by James Eury on Feb 24th 2022

    My second 10/22 build and second Tier 2 work + Pull Magazine Release. Performance is fantastic and work was done Fast. Thank you

  • 5
    This was the fourth trigger group to be done for me in the Tier 2 level.

    Posted by Chris L on Feb 6th 2022

    Very happy with the results as with the previous three trigger groups.

  • 5
    Tier 2 10/22 Trigger Work

    Posted by Dan Martin on Dec 31st 2021

    My expectations were exceeded when my trigger came back to me with a pull of only 2lbs. 5oz.. I also love the feel and looks of the new trigger paddle. I highly recommend Brimstone Gunsmithing. You can’t beat this trigger pull with any replacement trigger costing over twice as much.

  • 5
    Tier 2 trigger work

    Posted by Greg on Dec 13th 2021

    My trigger went from gritty with a good bit of take up to a very crisp sweet spot with very little take up.

  • 5
    Trigger Work

    Posted by Craig Murray on Dec 11th 2021

    What an amazing thing. I sent my trigger assembly in to get it down from 6+lbs on the pull weight. What I asked them to do is to put it in its happy place. Whatever weight it came in at was perfect to me. It came back with a note that it was happy at 2lbs. Crisp, clean break. I can hardly believe that it is my stock trigger assembly. Amazing.

  • 5
    10/22 tier 2 trigger work

    Posted by Jay on Dec 9th 2021

    Fantastic, wish I would have ordered it sooner!

  • 5
    Tier 2 trigger job

    Posted by Kip Paporello on Dec 9th 2021

    The trigger job makes a huge difference over stock in that it is very light and crisp. The new trigger looks great as well. Thank you.

  • 5
    Better than my BX trigger

    Posted by Ray Roznowski on Nov 24th 2021

    The trigger I sent in was new the quality of gun smithing was great , the trigger break was clean no over travel and 2 lbs pull weight . Nice job

  • 2
    Tier 2 (Intermediate) 10/22 Trigger Work

    Posted by Richard Norton on Nov 9th 2021

    The metal trigger with choice of colors is very nice and gives the rifle a feel of quality. I'm disappointed that the pull weight ended up at 3 pounds instead of the requested 2 pounds.