This is a trigger job on YOUR trigger group!! You are not buying new parts here.

You check out, ship us your group, and we will work our magic on it and ship it back. Seriously. We aren't shipping you a new group. You laugh, but at least five people a month do not read this.

This trigger job will work on the factory 10/22 trigger groups (metal or plastic), BX trigger groups, and the TCR trigger groups. If you have any questions about that, please let me know!

The Trigger Job

This trigger work has everything the basic trigger job has, so it's not a bad idea to at least skim the page to get some idea of what we are doing here. This job literally picks up where the basic trigger job stops. All of the same polishing/fitting/tuning happens exactly the same, but this job adds a couple of parts. Primarily, you are getting one of our billet aluminum CNC machined triggers. This trigger is going to feel slightly wider under your finger than the factory one, as it has a more flat profile than the factory trigger.

The real point, however, is that it allows the installation of an internal, torsion-type, trigger return spring mounted on the trigger itself. This torsion spring system has no moving or sliding parts (unlike the factory plunger) which allows us to get the take up and the reset silky smooth. The hole for the original trigger return spring is then drilled out, tapped, and an overtravel stop is installed in that hole. This is a much cleaner and more solid method than the screw through the trigger design. The overtravel stop makes the trigger feel vastly more crisp, and theoretically improves accuracy.

If you are more serious about your shooting or interested in competing, but still working within a budget, this is the job for you. It will result in an excellent trigger pull for a fraction of the cost of a full after market group. Of course, there are bragging rights and a custom look which come with a billet CNC'ed trigger housing, which is certainly something to consider. That said, it's hard to replace a little time and skill in hand fitting with any number of shiny after market parts, and we can often produce a better trigger pull than most of the aftermarket groups. It's not surprising really, you're not paying us to produce parts, just polish and fit them. Most of the big companies have a ton of money invested in the tooling to produce these custom pieces, so to keep costs down they have to produce them in large numbers. By just re-working the factory parts, we can invest the time needed to really fit and polish the parts as they should be, and still keep the overall cost down.

Pull Weight

We only offer the 'Sweet Spot' trigger pull weight now. This is where your trigger naturally wants to be. It will be between 2 and 2.5lbs. After 13 years of doing this... I'm done trying to convince a trigger to go somewhere it doesn't want to be, which always hurts the reliability to boot.

Trigger colors
In an effort to cut down on the lead time issues related to stocking over two dozen colors of triggers and accessories, we are now stocking only our most popular colors of triggers. We will have limited editions of triggers pop up throughout the year, so if you're looking for something unique, keep an eye out for that.

THE AUTO BOLT RELEASE MODIFICATION

There is a little metal tab on the bottom of the trigger housing, towards the front of the trigger guard. If you hold the bolt to the rear, push up on this tab, and let the bolt forward, it will lock the bolt open. This is used as a safety on ranges that require the action to be open when the range is 'cold', or for when you are cleaning the barrel. To close the bolt however, you need three hands. One to hold the rifle, one to pull back on the bolt, and the third to press up on that tab and somehow rotate it to the rear. It's a pain, and not exactly safe if you have a loaded magazine inserted. Our modification makes it so you still lock the action open exactly the same as before, but to close the bolt you just pull back slightly on the charging handle and let it go, just like you do with any other semi-auto firearm. The hold back will drop out of the way on it's own when you pull back on the charging handle, without you touching the bolt release. This is NOT a last round hold open! No 10/22 built has a last round hold open from the factory. There is one company making them, Google it if you have more questions. We don't carry or install the part.

Shipping Information

Complete shipping instructions and information can be found here.

Once you have purchased this service you will get a confirmation email with all the shipping and packing instructions. Print that off, and include it with your trigger.

We are currently aiming for a one week lead time on triggers, from when they arrive here. We ship everything out USPS Priority Mail, which should deliver your trigger quickly, but obviously we cannot be responsible for delays incurred with shipping, either to us or to you. When finished, you will get another email saying that your trigger is finished and shipped, with a tracking number.

Thanks for your interest! Feel free to contact us at any point, and happy shooting.

DISCLAIMER:

"RUGER" IS A FEDERALLY REGISTERED TRADEMARK OF STURM, RUGER & COMPANY, INC. AND IS ONE OF MANY FEDERALLY REGISTERED TRADEMARKS OWNED BY STURM, RUGER & COMPANY, INC. BRIMSTONE GUNSMITHING NOR THIS SITE ARE AFFILIATED IN ANY MANNER WITH, OR OTHERWISE ENDORSED BY, RUGER, OR STURM, RUGER & COMPANY, INC.

192 Reviews

5
Tier 2 10/22 Trigger Work

Posted by Dave Simons on Nov 7th 2021

I wanted to try this trigger work before I spent the big bucks for a more pricy trigger for my Steel Challenge rimfire iron sight rifle. Now that I have it back I see no need for the pricy trigger. The note from the gunsmith said 2 lbs 1 oz and my trigger pull gauge agreed. There is minimal amount of smooth take up and a clean break with very little overtravel. Turn around with time in transit both ways included was 14 days. This work from Brimstone definitely gets five stars.
5
Tier 2 trigger work

Posted by Brian Piatek on Nov 6th 2021

My trigger came back as advertised. It went from 6lb pull to 2.1lb. The trigger is very smooth and looks good in the rifle.
5
Ruger 10/22 trigger

Posted by Dale Geiler on Oct 6th 2021

Quick turn around, great communication and very smooth trigger when reinstalled!!
5
Tier 2 10/22 trigger job

Posted by Mike Ferraiolo on Sep 22nd 2021

I’m glad I didn’t spend $275. On a after market trigger! When I sent them my trigger it was a sloppy 6 lb they returned a crisp 2 lb trigger that feels even lighter than that. Highly recommend.
5
10/22 Tier 2 trigger job

Posted by Jim on Aug 30th 2021

Oh, man, this is a NICE trigger pull! Got their Tier 2 trigger job and asked for "the sweet spot". The handwritten note from the gunsmith said "2 lbs 1 oz" but it feels lighter. There is a tiny amount of smooth take up and then it breaks with no perceptible movement. Turn around with time in transit both ways included was 29 days. This work from Brimstone definitely gets five stars and two thumbs up!
5
Better than $300+ triggers!

Posted by Seth on Aug 18th 2021

I have over a dozen 10/22 style rifles all with custom (non factory) triggers. This work is right up there with triggers that Ive spent $300 and over on! I now have three brimstone trigger jobs and plan on more!
5
Tier 2 (Intermediate) 10/22 Trigger Work

Posted by Tim on Aug 16th 2021

This compares favorably to the other , very pricey, drop in units on the market. The work is top notch. Stop thinking about sending yours in and do it. I am VERY happy with mine.
5
Trigger job on 10/22

Posted by Tom Saugey on Aug 12th 2021

The tier 2 upgrade for Ruger 10/22 changed my rifle from a good gun to a great one. I’m very pleased with Brimstones work.
3
Trigger pre-travel not the best.

Posted by Timothy on Aug 11th 2021

My hornet trigger came back with the zombie green trigger. Pre-travel was pretty draggy/stiff. Been shooting it alot.. starting to break in a little bit. Some CLP helped. But once I get to the "wall" she's very good. Maybe in time it'll get better. I hope so.
4
TIER 2 10/22 TRIGGER

Posted by TERRY TUCKER on Jul 1st 2021

THIS WAS 2ND TIER 2 WORK. SO YES SATISFIED RETURN CUSTOMER.
5
Tier 2

Posted by Steve Martin on Jul 1st 2021

I recently received my Ruger 10-22 trigger group back from Brimstone. I sent 1 BX and 3 poly standard & 3 aluminum groups. All had Tier 2 work along with mag release upgrade. Great service. Confirmed arrival and work to be done. Fast turn around. All 7 returned with 7 different colors returned less than a month! Quality is fantastic. All 7 were glass break crisp with solid pre travel. Tested and interchanged them in different rifles & 1 Charger. All worked even when interchanging. 5 of these are for SASP jr guns. I'm impressed with the quality work and will recommend this service highly. As the coach for our SASP team, this is a very good upgrade for reliable, repeatable performance.
5
TIER 2 (INTERMEDIATE) 10/22 TRIGGER WORK

Posted by Unknown on Jun 28th 2021

Great work and quick turnaround. Took the rifle out this past weekend. Trigger breaks consistently at 2lbs with no take up. Highly recommend.