This will be our own trigger internals. This will result in a trigger pull similar to what we get out of a BX trigger now, but with our own drop in parts. Prototypes are largely finished for this (Rev 3), and we hope that production will begin soon.

At this point we expect that this will initially only be available as a part that we install in your trigger group. Once we've done a couple hundred of them and feel that the install is dialed in, they should become available as a drop in part.

Thanks for your patience, and we look forward to bringing this product to market!

DISCLAIMER:

"RUGER" IS A FEDERALLY REGISTERED TRADEMARK OF STURM, RUGER & COMPANY, INC. AND IS ONE OF MANY FEDERALLY REGISTERED TRADEMARKS OWNED BY STURM, RUGER & COMPANY, INC. BRIMSTONE GUNSMITHING NOR THIS SITE ARE AFFILIATED IN ANY MANNER WITH, OR OTHERWISE ENDORSED BY, RUGER, OR STURM, RUGER & COMPANY, INC.

102 Reviews

5
tier 3

Posted by Ralph on Mar 10th 2020

Nice crisp 2.5 pound break with all the take up and after travel of a factory trigger. It's the same as a Ruger BX, for less money.
5
Tier 3 Trigger

Posted by Dan on Feb 17th 2020

This is the third Tier 3 trigger job I have purchased from Brimstone. I also have a Ruger upgrade BX trigger for the 10/22, which cost me about the same and is a significant improvement over the stock trigger, but not as good as the Brimstone.
5
Level 3 trigger

Posted by TRAVIS JONES on Jan 30th 2020

Unbelievable improvement for so little money! Best value ever!
4
10 times better than when bought from the factory it had about a 7lb full now it is a 2 lb pull

Posted by William keas on Jan 25th 2020

I'm very satisfied with the price in the work
5
Tier3 trigger job

Posted by Guy D Lowmack on Jan 14th 2020

I sent in two metal trigger groups to have a Tier3 trigger job. I received them back in one week and I'm very happy with the results (2.3 lbs and 2.4 lbs). I have two more trigger groups that I will be sending in next month! Great Company!
5
Ruger 10/22 trigger

Posted by John Bowler on Jan 4th 2020

The trigger came back very smooth. The take up is much shorter and it has a very nice wall and break. Very light weight and all the slop and grit has been eliminated. 5 stars***** I will send in all my father-in-laws once I can get to them.
5
Tier 3 (Basic) Ruger 10/22 Trigger Work

Posted by Terry Tomayko on Jan 4th 2020

Extremely happy with the trigger work. 2.1 pounds, with negligible take up and quick reset. Great job, thanks.
5
Tier 3 service on 10/22

Posted by Dennis Hahn on Jan 3rd 2020

I'm very pleased with the service/turn around and the results on my trigger break! Highly recommend considering owners of the 10/22 get the trigger break reduced!
5
Ruger 10/22 Tier 3 Trigger Job

Posted by Jerry on Jan 3rd 2020

Best investment for the money! Trigger is now a crisp 2 pounds. Turnaround time was very fast even with the holidays. They were quick to answer my questions prior to ordering.
5
Huge Improvement

Posted by Gabriel Peaster on Dec 17th 2019

This trigger feels awesome! Smooth take up, crisp break at 2lbs 2oz! Thanks!
5
Tier 3 10/22 Target trigger work on

Posted by Craig Rivera on Nov 23rd 2019

Received my second Tier 3 trigger job for my Target Model 10/22. Again Brimstone out did themselves. Installed trigger and sure enough average 2.1 trigger pull. Trigger work again transformed my Target 10/22 into the rifle it should be.I have now again getting ready to send my last 10/22 trigger in to be reworked to the tier 3 to 2 pounds to be used at the steel challenge range I shoot at. I expect nothing , but another great trigger job from Brimstone Gunsmithing. Thank You Again Brimstone!!!
5
PURCHASE THE TIER 3 (BASIC) RUGER 10/22 TRIGGER WORK

Posted by CRAIG RIVERA on Oct 10th 2019

IN SEPTTEMBER 26, 2019, I SENT MY TRIGGER GROUP ON MY GREEN CAMO 10/22 ,TO BRIMSTONE. MY AVERAGE TRIGGER PULL WAS 6.3 LBS. WHICH WAS TERRIBLE. WHEN I RECIEVED MY FINISH PRODUCT FROM BRIMSTONE THE TRIGGER PULL AVERAGE WAS 2.1 LBS. I WAS SO HAPPY WITH THE RESULT, THAT I JUST SENT MY RUGER TARGET BULL BARREL 10/22 TRIGGER GROUP TO BRIMSTONE THIS WEEK OCTOBER 7, 2019. THE TRIGGER PULL ON THAT TARGET MODEL AVERAGE 4.5LBS., WHICH IS ALSO TERRIBLE FOR A TARGET MODEL. I ALSO ASKED FOR THE TIER 3 (BASIC) TRIGGER WORK TO BE DONE AND SET AT 2 LBS. I CAN NOT WAIT TO RECIEVE MY TRIGGER GROUP BACK FROM BRIMSTONE, SO I CAN BE PROUD OF THE PERFORMANCE OF MY RUGER TAGET 10/22. BRIMSTONE HAS ACHIEVED THE TOTAL CONFIDENCE FROM A VERY SATISFIED CUSTOMER. THANK YOU FOR YOUR VALUED WORK AS PROFESSIONAL GUNSMITH'S AT A REASONABLE PRICE.